In accordance with personal data protection laws enforced by the European Union, we are committed to protecting your personal data and providing you with control over your personal data.
We have updated and will periodically update our Privacy Policy, to comply with the personal data protection. Please refer to our latest version of Privacy Policy。
This website uses cookies to provide a better browsing experience. To find out more about the cookies we use, pleas check here。
APW8833/C/E/F
Active
System Power PWM Controller with Economy Standby Mode
Features
- PWM2 Controller with Adjustable (2V to 5.5V) Output
- 100mA Low Dropout Regulator (LDO5) with Fixed 5V Output
- 100mA Low Dropout Regulator (LDO3) with Fixed 3.3V Output
- 250kHz Clock Signal for 15V Charge Pump (Used PWM1 as Its Power Supply)
General Description
The APW8833 integrates dual step-down, constant-ontime, synchronous PWM controllers (that drives dual Nchannel MOSFETs for each channel) and two low dropout regulators as well as various protections into a chip. The PWM controllers step down high voltage of a battery to generate low-voltage for NB applications. The output of PWM1 and PWM2 can be adjusted from 2V to 5.5V by setting a resistive voltage-divider from VOUTx to GND. The linear regulators provide 5V and 3.3V output for standby power supply. The linear regulators provide up to 100mA output current. When the PWMx output voltage is higher than LDOx bypass threshold, the related LDOx regulator is shut off and its output is connected to VOUTx by internal switchover MOSFET. It can save power dissipation. The charge pump circuit with 250kHz clock driver uses VOUT1 as its power supply to generate approximately 15V DC voltage. The APW8833 provides excellent transient response and accurate DC output voltage in either PFM or PWM Mode. In Pulse-Frequency Mode (PFM), the APW8833 provides very high efficiency over light to heavy loads with loadingmodulated switching frequencies. The Forced-PWM Mode works nearly at constant frequency for low-noise requirements. The unique ultrasonic mode maintains the switching frequency above 25kHz, which eliminates noise in audio application. The APW8833 has individual enable controls for each PWM channels. Pulling both EN1/2 pin low shuts down the all of outputs . The LDO3 and LDO5 of APW8833 B/C/ E/F are always on standby power.The APW8833 is available in a TQFN3x3-20 package.
Features
- Wide Input voltage Range from 5.5V to 25V
- Provide 5 Independent Outputs with ±1.0% Accuracy Over-Temperature
- PWM2 Controller with Adjustable (2V to 5.5V) Output
- 100mA Low Dropout Regulator (LDO5) with Fixed 5V Output
- 100mA Low Dropout Regulator (LDO3) with Fixed 3.3V Output
- 250kHz Clock Signal for 15V Charge Pump (Used PWM1 as Its Power Supply)
- Excellent Line/Load Regulations about ±1.5% over temperature range at PWM Channels
- Low Consumption in Standby Mode
- 2Cells Input Battery Support
- Built in POR Control Scheme Implemented
- Constant On-Time Control Scheme
- Built in Soft Start for PWM Outputs and Soft Stop for PWM Outputs and LDO Outputs
- Integrated Bootstrap Forward P-CH MOSFET
- High Efficiency over Light to Full Load Range (PWMs)
- Built in Power Good Indicators (PWMs)
- 60% Under-Voltage and 115% Over-Voltage Protections (PWM)
- Adjustable Current-Limit Protection (PWMs)
- Over-Temperature Protection
- 3mmx3mm Thin QFN-20 (TQFN3x3-20) package
- Lead Free and Green Device Available (RoHS Compliant)
General Description
The APW8833 integrates dual step-down, constant-ontime, synchronous PWM controllers (that drives dual Nchannel MOSFETs for each channel) and two low dropout regulators as well as various protections into a chip. The PWM controllers step down high voltage of a battery to generate low-voltage for NB applications. The output of PWM1 and PWM2 can be adjusted from 2V to 5.5V by setting a resistive voltage-divider from VOUTx to GND. The linear regulators provide 5V and 3.3V output for standby power supply. The linear regulators provide up to 100mA output current. When the PWMx output voltage is higher than LDOx bypass threshold, the related LDOx regulator is shut off and its output is connected to VOUTx by internal switchover MOSFET. It can save power dissipation. The charge pump circuit with 250kHz clock driver uses VOUT1 as its power supply to generate approximately 15V DC voltage. The APW8833 provides excellent transient response and accurate DC output voltage in either PFM or PWM Mode. In Pulse-Frequency Mode (PFM), the APW8833 provides very high efficiency over light to heavy loads with loadingmodulated switching frequencies. The Forced-PWM Mode works nearly at constant frequency for low-noise requirements. The unique ultrasonic mode maintains the switching frequency above 25kHz, which eliminates noise in audio application. The APW8833 has individual enable controls for each PWM channels. Pulling both EN1/2 pin low shuts down the all of outputs . The LDO3 and LDO5 of APW8833 B/C/ E/F are always on standby power.The APW8833 is available in a TQFN3x3-20 package.
